This dataset contains crosswalk unit processes. These processes provide a transparent linkage between version 1 field crop production unit processes on the USDA LCA Commons and upstream ecoinvent version 2.2 unit process providers.
This product system represents the poultry meat produced for human consumption as a result of producing one broiler. Both types of live weight poultry are at the farm gate, ready for transport to the processing plant, although not necessarily at the same farm. It includes the fraction of a spent hen attributable to the production of one broiler.
This unit process represents the gate-to-gate production of 1 air-dried metric tonne of kraft lignin, coproduced with southern bleached softwood kraft pulp (SBSK), high voltage electricity and unrefined tall oil soap. The pulp is derived from pine or loblolly pine in a kraft pulping process at a mill in the southern United States (U.S.). Lignin is extracted via precipitation and acid washing. All flows are production weighted to kraft lignin. The SBSK pulp production technologies are an aggregation of those applied in the southern U.S. in 2013.
This product system model represents the generation of two co-products from forest or wood product mill operation residues using the Tucker Renewable Natural Gas (RNG) Thermochemical conversion process. The two co-products are a synthesis gas (syngas) and biochar (a form of charcoal made from woody biomass via pyrolysis, used as a soil amendment, and under investigation as an approach to carbon sequestration to produce negative carbon dioxide emissions). Data for this process were collected in St. Regis, Montana and Locust, NC, where the Tucker RNG conversion process has been tested and demonstrated.
The swine production datasets are the product of ongoing work by the University of Arkansas Center for Agricultural and Rural Sustainability, the United States Department of Agriculture, and the National Pork Board. The data documentation in this metadata record describes the project background and nomenclature, in addition to a description of the dataset structure, individual unit processes, and production scenarios. Flow-level metadata descriptions for selected unit processes within the U.S. swine dataset can be found in the Appendix section.
Unit process data for bio-jet fuel production from poplar biomass via bioconversion at a biorefinery
A partial Life Cycle Assessment (LCA) is conducted to investigate the life cycle impacts of a biorefinery designed to convert poplar tree chips into jet fuel via fermentation and subsequent hydrogenation. The goal of producing jet fuel from Populus (poplar) trees (bio-jet) is to create an alternative to petroleum based jet fuel (petro-jet). Currently no jet fuel producing biorefineries are in commercial operation and the results of this LCA will be used to assess a potential environmental impact that could result from scaling up the proposed system. Work is part of the Advanced Hardwood Biofuels Northwest project.
This document describes the preparation of datasets for the LCA Commons that represent unit process/ gate-to-gate operations for field operations (a.k.a. work processes e.g., soil preparation and planting for conventional tillage, applying fertilizer with incorporation) and farm implements (e.g., operation of moldboard plows, broadcast sprayers) used in the production of field crops. The data cover 49 types of field operations and 104 types of farm implements for 9 crops in 36 U.S. states, resulting in the development of almost 19,000 unit process datasets. The field operation and farm implement datasets described herein fall between the field crop production and the aggregated fleet equipment datasets already in the Commons.
This document describes the preparation of datasets for the LCA Digital Commons that represent unit process/ gate-to-gate operations for the production of work (in MJ) by agricultural self-propelled equipment and fleets of agricultural self-propelled equipment. The data cover 19 types of fleets and over 200 types of self-propelled equipment datasets, representing the potential to prepare thousands of unit-process datasets by varying the operating and model years, applicable power ranges, and operating temperatures.
The goals for the release of Version 2 of the field crop data are to rework the data to link up with the tier 2 field operations/ work process datasets, eliminate the use of service processes, and rework balance parameters using a simpler formula. Models represent states that produced field crops in the ARMS survey years included.